Siemens Advance Network Gateway User Manual page 27

AC Power (Mains) Connections,
2000590-001
Continued
Step
6. Locate the power-input connector on the power supply as-
sembly. Loosen the wire retaining screws on top of con-
nector. Strip the insulation ¼ -inch back from each of the
power supply leads. Insert each lead in the correct location,
and tighten down retaining screws.
7.
Locate the ANG_EN chassis ground lug
wire from it to the building's ground connection.
8. Inspect all connections for shorts or loose connections.
9. You are now ready to connect the Data Hiway cable; con-
tinue with Data Hiway Connections, page 20.
Action
and connect
Installation 19