9.43 Registration Mark Sensor Holder ASSY/
Shutter Solenoid
(1) Disconnect the Connector (CN8) from the High-voltage power supply PCB ASSY.
CN8
Connector
High-voltage power supply PCB ASSY
(2) Remove the Core from the Harness of the Registration mark R PCB and Belt temperature
sensor.
Belt temperature sensor
Registration mark R PCB
Core
High-voltage power supply PCB ASSY
Fig. 3-131
<Left side>
Fig. 3-132
3-102
Registration mark
sensor holder ASSY
Confidential