Brother HL-4140CN Service Manual page 427

APPENDIX 2 DELETION OF USER SETTING INFORMATION, ETC.
In this printer, the user setting information is stored in the EEPROM and flash memory of the main
PCB ASSY. You can delete all the data listed below at a time with the procedure given below.
- Information related to Net
- User setting information
- Computer usage limit information (HL-4570CDW/4570CDWT only)
<Operating procedure>
(1) Disconnect the network cable from the printer.
(2) Press the or
(3) Press the OK button. The "Reset Menu/Network" will appear on the LCD.
(4) Press the and Cancel buttons at the same time. The "Reset Menu/Settings Reset" will
appear on the LCD.
(5) Press the OK button. The "Settings Reset/
(6) Press the button. The "Reboot OK?/
(7) Press the button again, and the printer automatically restarts, the user setting information is
deleted, and the printer goes back to the ready state.
Note:
The printer returns to the ready state automatically if no panel operation is implemented
for 30 seconds.
button in the ready state until "Reset Menu" appears on the LCD.
App.2-1
Reset Exit" will appear on the LCD.
Yes No" will appear on the LCD.
Confidential