Deletion Of User Setting Information, Etc - Brother HL-4140CN Service Manual

2.5

Deletion of User Setting Information, etc.

In this printer, the user setting information is stored in the EEPROM and flash memory of the
main PCB. You can delete all the data listed below at a time with the procedure given below.
- Information related to Net
- User setting information
- Computer usage limit information (HL-4570CDW/4570CDWT only)
<Operating procedure>
Note:
The printer returns to the ready state automatically if no panel operation is
implemented for 30 seconds.
(1) Disconnect the network cable from the printer.
(2) Press the or
Menu" appears on the LCD.
(3) Press the OK button. The "Reset Menu/Network" will
appear on the LCD.
(4) Press the and Cancel buttons at the same time. The
"Reset Menu/Settings Reset" will appear on the LCD.
(5) Press the OK button. The "Settings Reset/
Exit" will appear on the LCD.
(6) Press the button. The "Reboot OK?/
will appear on the LCD.
(7) Press the button again, and the printer automatically
restarts, the user setting information is deleted, and the
printer goes back to the ready state.
5-63
button in the ready state until "Reset
Reset
Yes No"
Confidential