Brother HL-4140CN Service Manual page 335

<Operating procedure after adjustment inter-color position alignment (auto)
fails>
1) Press the
state of the maintenance mode. Then, press the OK button. "REGISTRATION" is
displayed on the LCD. Load A4-size paper on the tray.
2) Press the
OK button.
3) Display "PRINTING" on the LCD, and print the inter-color position alignment
adjustment chart. After printing, "PRINT CHART" is displayed again.
4) Press the
the OK button. "1. MAGENTA = 0" is displayed on the LCD.
5) With the printed inter-color position alignment adjustment chart, check the numeric
value where the color is the darkest among the pattern
the or
6) Enter the numeric value of the patterns
7) When you enter the numeric value of the pattern
displayed.
8) Press the Cancel button to return to the printer to the initial state of the maintenance
mode.
■ Adjustment of inter-color position alignment (manual)
<Operating procedure>
(1) Press the or
the maintenance mode. Then, press the OK button. "REGISTRATION" is displayed on
the LCD. Load A4-size paper on the tray.
(2) Press the or
button.
(3) Display "PRINTING" on the LCD, and print the inter-color position alignment adjustment
chart. After printing, "PRINT CHART" is displayed again.
(4) Press the or
the OK button. "1. MAGENTA = 0" is displayed on the LCD.
(5) With the printed inter-color position alignment adjustment chart, check the numeric value
where the color is the darkest among the pattern
the or button to display that numeric value, and then press the OK button.
(6) Enter the numeric value of the patterns
(7) When you enter the numeric value of the pattern
displayed.
(8) Press the Cancel button to return to the printer to the initial state of the maintenance
mode.
or button to display "MAINTENANCE 66" on the LCD in the initial
or button to display "PRINT CHART" on the LCD, and then press the
or button to display "OFFSET ADJUST" on the LCD, and then press
button to display that numeric value, and then press the OK button.
button to display "MAINTENANCE 66" on the LCD in the initial state of
button to display "PRINT CHART" on the LCD, and then press the OK
button to display "SET REGISTRATION" on the LCD, and then press
5-22
(Magenta Left). Press
1
to and to
2 3 7
(Yellow Right), "COMPLETED" is
9
(Magenta Left). Press
1
to in the same way.
2 9
(Yellow Right), "COMPLETED" is
9
in the same way.
9
Confidential