Chapter 3 - Basic Operations; Configuration Examples; Startup Of The Gr2000-B; Figure 3-1 Example Of A Gr2000-B Connecting To Other Devices - Hitachi GR2000-B Series Quick Start Manual

This chapter shows examples of the commands required for connecting the
GR2000-B to other devices. The chapter contains the following sections:
„

Configuration examples

„

Startup of the GR2000-B

„
Configuration setting
„
Display of the operation status
„
Details about the commands introduced in this chapter
„
More details about the operation
3.1 Configuration Examples
Using the example below, this section explains about the simple method of setting
configurations.
Network A
Server
PC
PC Built-in Ethernet
Port 0
IP 192.168.1.1

Figure 3-1 Example of a GR2000-B Connecting to Other Devices

To construct the configuration above in Figure 3-1, set the GR2000-B according to
the following instructions:
„
Set IP address "192.168.1.1" for PORT 0 of the GR2000-B built-in Ethernet.
„
Set IP address "192.168.2.1" for PORT 1 of the GR2000-B built-in Ethernet.
„
Set IP address "192.168.2.2" for a default route (in case that the IP address
"192.168.2.2" is set for the port of the peer router.)
GR2K-GA-0008
Rev. 1.00
Basic Operations
Network B
GR2000-B
Built-in Ethernet
Port
IP 192.168.2.1
Chapter 3
Network C
PC
Peer Router
PC
3-1