Check The Configuration You Set By Displaying Its Information; Save The Configuration Information Into The Configuration File; Close The Configuration File; Return To The Administrator Mode - Hitachi GR2000-B Series Quick Start Manual

3.3.6

Check the Configuration You Set by Displaying its Information

Note: Although you can skip this operation, check if the configuration information
*
edited is correct to avoid the trouble at the time the GR2000-B starts running.
For the display style, refer the examples of each command execution.
3.3.7

Save the Configuration Information Into the Configuration File

Note: The configuration information is saved into the file currently opened in case that
*
you skip inputting a file name. Therefore, in this example, the information is
saved into the operative configuration file on memory. You can save the
information into any preparative configuration file designated by inputting a file
name.
3.3.8

Close the Configuration File

3.3.9

Return to the Administrator Mode

GR2K-GA-0008
Rev. 1.00
The edited configuration information is saved into the configuration
file you are working on using the save command.
The ! prompt is deleted after the configuration information is saved.
The configuration file being edited is closed by the close command.
The edit is finished using the exit command, and the
system returns to the administrator mode (# prompt).
Basic Operations
The configuration information is
displayed by the show command.
The information displayed
as a result.
The "(config)#" prompt is shown
after the information is displayed.
3-5