Table 1-75 Parameters That Can Be Set By Each Transmission Control - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Deleting information
Displaying information
Table 1-75 shows the parameters that can be set by each transmission control.

Table 1-75 Parameters That Can be Set by Each Transmission Control

Output
Parameter
Priority
Control
<Line Name>
<DLCI Name>
<Timeslot Name>
<Peer Name>
<VLAN Name>
-queue_list
<Queue-List-Name>
-queue_list --
<Queue-List-Name>
-group <No.> --
-peak_rate <kbps> --
-traffic <Queue No.> --
-constant-peak_rate
<kbps>
: Usable
-: Unusable
*1: Only a slow-speed WAN line can be set.
*2: Only an Ethernet line and a Gigabit Ethernet line can be set.
*3: Only VLAN lines in GR2000-1B and GR2000-2B can be set.
*4: Only Ethernet lines and Gigabit Ethernet lines in GR2000-1B and GR2000-2B can be set.
1-154
Sending Control
Minimum
Round-
Bandwidth
robin
Guarantee
-- --
-- --
-- --
-- --
-- --
Minimum
Uniform
Bandwidth
minimum
Guarantee
band
(specified in
guarantee
kbit/s)
--
--
-- --
-- --
-- --
-- --
-- --
-- --
Bandwidt
Group
h control
bandwidth
(specified
control
in traffic)
-- --
-- --
-- --
(*3) (*4)
--
-- (*4)
-- (*4)
-- (*4)
-- (*4)
GR2K-GA-0014
Ver. 07-02