Hitachi GR2000 Series Configuration Commands page 317

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Description:
Default:
Range of value:
Description:
Default:
Range of value:
Example
Create RMON Ethernet history-group control entries and show the resulting
history-group control entries in the following order:
1. Using the snmp object with the set subcommand omitted, create an SNMP
Manager entry with the following properties:
Community name: public
SNMP Manager IP address: 30.1.1.1
MIB access mode: read/write
2. Using the line object with the set subcommand omitted, set the Ethernet line
information with the following properties. (The IP address must be predefined.)
Line name: kyoto
NIF/line number: 0/0
3. Using the line object with the set subcommand omitted, set the Gigabit Ethernet
line information with the following properties. (The IP address must be
predefined.)
Line name: osaka
NIF/line number: 4/0
4. Using the history-control object with the set subcommand omitted, create an
RMON Ethernet history-group control entry for the above-mentioned Ethernet
line with the following properties:
RMON Ethernet history-group control index number: 33
Interface name: kyoto
Number of history-group entries: 10
Owner: "net-mgr ken"
5. Using the history-control object with the set subcommand omitted, set the RMON
Ethernet history-group control entry for the above-mentioned Gigabit Ethernet
line with the following properties:
GR2K-GA-0014
Ver. 07-02
Sets the interval of time in seconds for collecting RMON
Ethernet history events. This parameter corresponds to
historyControlInterval of RFC1757.
1800
1-3600
Sets the identification information for the person who created
this setting. This parameter corresponds to historyControlOwner
of RFC1757.
Blank
A string of up to 24 alphanumeric and special characters
enclosed in double quotation marks. When the string contains
only alphanumeric characters and no special characters
except period, you can omit double quotation marks. See Table
2-1, in GR2000 Configuration Commands, (universal CLI) Vol. 1.
for allowable characters.
SNMP Information
3-9

Advertisement

Table of Contents
loading

Table of Contents