Filtering-Database - Hitachi GR2000 Series Configuration Commands

Related Commands
bridge
line
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the apply command is not being executed, the apply subcommand
is executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.2.3

filtering-database

By using filtering-database (FDB), you can delete and relay the frame, based on the
source and destination MAC addresses. You can set the aging timer value and static
entry.
Input Format
Defining
Modifying
Inserting
Deleting
Displaying
show filtering-database
Parameters
Description:
Default:
Range of value
GR2K-GA-0014
Ver. 07-02
This parameter sets the age-out timer for dynamic entries in
the filtering database.
300
10-1000000
IPX/Bridge Information
2-33