Hitachi GR2000 Series Configuration Commands page 464

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-8
Can not set penalty_discard because
replace_dscp or dscp_map is already defined.
Can not set penalty_dscp because
replace_dscp or dscp_map is already defined.
Can not delete replace_dscp because
penalty_dscp is already defined.
Can not delete dscp_map because
penalty_dscp is already defined.
Can not set or change IPv6 flow qos.
Can not set Tunnel interface in flow qos
configuration.
cops_range out of range
syntax error
Can not delete qos_interface configuration
referred by flow qos configuration.
No such QoS group number.
Can not set penalty_drop because group is
already defined.
Can not set replace_tos or replace_dscp
because group is already defined.
Can not set penalty_tos or penalty_dscp
because group is already defined.
Can not set tos_map or dscp_map because
group is already defined.
Can not set replace_exp because group is
already defined.
Can not set penalty_discard because group is
already defined.
5-74
Flow Information Error Messages (continued)
Contract band breaching queuing priority cannot be set because the
dscp rewrite value or dscp_map has been defined. To set the
contract band breaching queuing priority, delete the dscp rewrite
value or dscp_map.
Can not set penalty_dscp because replace_dscp or dscp_map is
already defined.
The dscp rewrite value cannot be set because the contract band
breaching dscp rewrite value has been defined. To set the dscp
rewrite value, delete the contract band breaching dscp rewrite value.
The dscp_map cannot be set because the contract band breaching
dscp rewrite value has been defined. To set the dscp_map, delete
the contract band breaching dscp rewrite value.
The IPv6 flow QoS information can neither be set nor changed in the
RP-A1, RP-C and RP-D.
The flow qos cannot be set in the tunnel interface.
The input value is out of the prescribed range. Set the range of 1 to
20,000 to the list number used in COPS function.
Syntax error
The designated qos_interface configuration definition cannot be
deleted because the QoS group band control group number (group)
designated by the flow qos has been set. To delete the designated
qos_interface configuration definition, delete the QoS group band
control number that has been designated by the flow qos.
[ROUTE-OS6B]
The QoS group band control group number (group) designated by
the flow qos does not exist. Designate the QoS group band control
group number that has been set. [ROUTE-OS6B]
Contract band breach packet abolishment cannot be set because the
QoS group band control group number (group) has been defined. To
set contract band breach packet abolishment, delete the QoS group
band control group number. [ROUTE-OS6B]
The rewritten values for the contract band breach tos or the contract
band breach dscp cannot be set because the QoS group band
control group number (group) has been defined. To set the rewritten
values for contract band breach tos or contract band breach dscp,
delete the QoS group band control group number. [ROUTE-OS6B]
The rewritten values for the contract band breach tos or the contract
band breach dscp cannot be set because the QoS group band
control group number (group) has been defined. To set the rewritten
values for contract band breach tos or contract band breach dscp,
delete the QoS group band control group number. [ROUTE-OS6B]
The tos_map or the dscp_map cannot be set because the QoS
group band control group number (group) has been defined. To set
the tos_map or the dscp_map, delete the QoS group band control
group number. [ROUTE-OS6B]
The rewritten value for the exp field cannot be set because the QoS
group band control group number (group) has been defined. To set
the rewritten value for the exp field, delete the QoS group band
control group number. [ROUTE-OS6B]
The contract band breach queuing priority cannot be set because the
QoS group band control group number (group) has been defined. To
set the contract band breach queuing priority, delete the QoS group
band control group number. [ROUTE-OS6B]
GR2K-GA-0014
Ver. 07-02

Advertisement

Table of Contents
loading

Table of Contents