Pppoe Information; Table 4-9 List Of Initial Values That Can Be Set Using Pppoe Information And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

4.7.9

PPPoE Information

Input Format
Parameters
TThe initial value items that can be set using PPP Information and the initial values
during initial installation are shown in Table 4-9. For details of each parameter, refer
to the configuration definition information in "PPPoE Information" [ROUTE-OS6B].
Table 4-9
Information
Group Name
PPPoE
information
GR2K-GA-0014
Ver. 07-02
List of Initial Values That Can Be Set Using PPPoE Information and Initial
Values During Initial Installation
Information Name
Certification protocol type used when connecting with a
provider.
Number of echo-RQ frame trial (PPPoE session connection
surveillance function)
Interval of echo-RQ frame transmission (PPPoE session
connection surveillance function)
Automatic reconnection time for PPPoE session
Designation of automatic acquisition of DNS server address
Maximum length of data that can be received in a PPPoE
session. (Maximum value of MTU of the counterpart server)
Rewriting the maximum segment length (MSS) designation
option of the TCP connection request (SYN) packet.
Operation Management Information
Initial Value
4500 bytes
5 times
60 second
10 seconds
yes
1492 bytes
auto
4-43