Hitachi GR2000 Series Configuration Commands page 472

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-9
Relation between Rate1, Rate2, Rate3 and
Rate4 are inconsistent.
The total of QoS queue list bandwidth
exceeded 100%.
The total of traffic peak rate, traffic min rate
exceeded bandwidth traffic.
Relations between traffic min rate and traffic
peak rate are inconsistent.
Relations between traffic peak rate and
bandwidth traffic are inconsistent.
Invalid UPC group No.
Invalid UPC mode.
UPC bandwidth not specified.
Can not set flow configuration,qos_ip_list or
filter_list configuration simultaneously.
5-82
Filter and QoS Information (Other than Flow Information) Error Messages
The sum total of the maximum send bandwidth of each queue is
greater than 100%. Set the value so that the sum total does not
exceed 100%.
Total of QoS queue list bandwidth values exceeded 100%. Decrease
the total to 100% or less.
The sum of the queue traffic minimum guarantee band and the
queue traffic maximum restriction band exceeds the band allocation
control (traffic). Set it so that the value is less than the band
allocation control (traffic).
Relations between traffic min rate and traffic peak rate are
inconsistent. Set the correct value.
Relations between traffic peak rate and bandwidth traffic are
inconsistent. Set the correct value.
The upe group number is incorrect. Set the value correctly.
The band control (max_rate_importance, max_rate_normal,
min_rate_importance, min_rate_normal) has been set incorrectly.
Set the value correctly.
The contract band when the contract band surveillance function is in
use has not been set. Set the contract band.
It is not possible to simultaneously set flow configuration information
and "qos_ip_list" or "filter_list" in the configuration definition file.
Delete "qos_ip_list" or "filter_list" in order to set flow configuration
information. In addition, delete flow configuration information in order
to set "qos_ip_list" or "filter_list."
GR2K-GA-0014
Ver. 07-02

Advertisement

Table of Contents
loading

Table of Contents