Hitachi GR2000 Series Configuration Commands page 250

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Parameters
Description:
Default:
-priority_class <No.>
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Examples
1. Setting parameters:
To set the output priority class 3 and queuing priority class 1 in the interface
named
2. Modifying parameters:
To change the queuing priority class of the interface named
1-208
This parameter sets the relevant interface name established in
the bridge interface settings. (Before entering this command,
establish the bridge interface settings.)
Cannot be omitted.
This parameter sets the output priority class. In the case of
output priority control, used as the output priority class. In
the case of bandwidth and round-robin, used as the queue
number.
4
1-8
This parameter sets the queuing priority class.
4
1-4
:
office1
from to :
office1 1 2
GR2K-GA-0014
Ver. 07-02