Table 1-38 General Protocol Number - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Flow detecting condition parameter:
Description:
Default:
Range of value:

Table 1-38 General protocol number

Protocol No.
1
6
8
17
88
89
Specifies the transmitter IP address.
If address to be designated is one:nnn.nnn.nnn.nnn
If address is designated by range:nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn
If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa
If all IPv4 addresses are designated:any
Default:
Range of value:
Specifies the destination IP address.
If address to be specified is one:nnnn:nnnn:nnnn:nnnn:nnnn
If address is specified by range: nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn
If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa
If all the IP addresses are specified:any
Default:
Range of value:
Sub-net mask length (aaa)0-32
This parameter enables the function that rewrites a DSCP value. It rewrites the
DSCP value that is the upper six bits of a TOS field. The lower two bits of a TOS
field are not rewritten.
2
DSCP (Differentiated Services Code Point), CU (Current Unused)
1-66
Specifies the high-order protocol number of the protocol name.
If all the protocols are taken as the object, ip is specified.
No default is possible.
0 to 255 (ten-decimals). (Please refer to Table 1-20.)
Protocol
ICMP
TCP
EGP
UDP
IGRP
OSPF
No default is possible.
IP address (nnn, nnn, nnn, nnn): 0.0.0.0-255.255.255.255
Sub-net mask length (aa): 0-32
No default is possible.
IP address (nnnn:nnnn:nnnn:nnnn):
0:0:0:0:0:0:0:0-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
7 6 5 4
2 2 2
DSCP
High-Order 6 Bits are Designated
3 2 1 0
2 2 2 2
CU
GR2K-GA-0014
Ver. 07-02