Table 1-84 Relationship Between Ip User Data Length Upper/Lower Limits And Ip User Total Data Length - Hitachi GR2000 Series Configuration Commands

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Default:
Range of value:
Description:
Table 1-84 Relationship Between IP User Data Length Upper/Lower Limits and IP User
Upper/Lower Limit Specification
-payload_length_upper_limit
-payload_length_upper_limit
-payload_length_lower_limit
-payload_length_lower_limit
Default:
Range of value:
Description:
Default:
Range of value:
GR2K-GA-0014
Ver. 07-02
None (upper-level protocols are not flow-detection conditions).
0-255
This parameter specifies IP user data length upper and lower
limits.
Specifies IP user data length upper limit.
Specifies IP user data length lower limit.
Total Data Length
None (IP user data length upper and lower limit values are not
flow detection conditions).
0-65535
This parameter specifies values corresponding to the 6
high-order bits in a TOS field or a DS field of Diff-serv, and
compares these to the 6 high-order bits of a received packet
TOS field or a DS field of Diff-serv.
The two low-order bits are ignored; specification is invalid.
7
6
2
2
Precedence
High-Order 6 Bits are Designated.
D (Delay), T (Throughput), R (Reliability)
7
6
2
2
High-Order 6 Bits are Designated.
DSCP (Differentiated Services Code Point), CU (Current Unused)
None (TOS values are not flow detection conditions).
(see note 2)
0-255
Relation between packet value A (packet
value= total length - header length) and
configured IP user data length B
A < or = B
A > B
A > or = B
A < B
5
4
3
2
2
2
2
D
T
R
5
4
3
2
2
2
DSCP
Filtering/QoS Information
Result
Match
Mismatch
Match
Mismatch
2
1
0
2
2
Unused
2
1
0
2
2
2
CU
1-171

Advertisement

Table of Contents
loading

Table of Contents