Hitachi GR2000 Series Configuration Commands page 412

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-5
attribute-list: invalid {BGP|BGP4+} metric
value at <Metric> not in range 0 to 65535
attribute-list: invalid index number in extended
community number value at <Value> not in
range 0 to { 65535 | 4294967295 }
attribute-list: invalid localpref offset value at
<Localpref> not in range 1 to 65535
attribute-list: invalid localpref value at
<Localpref> not in range 0 to 65535
attribute-list: invalid number of aspath value at
<Value> not in range 1 to 8
attribute-list: invalid number of communities
value at <Value> not in range 0 to 25
attribute-list: invalid number of extended
communities value at <Value> not in range 0
to 25.
attribute-list: invalid octet value at <Value> not
in range 0 to 255.
attribute-list: invalid range end: <Value>
attribute-list: invalid range start: <Value>
attribute-list: out of range
attribute-list: syntax error
autonomoussystem: autonomous-system
already specified
autonomoussystem: invalid autonomous
system value at <Value> not in range 1 to
65534
autonomoussystem: out of range
autonomoussystem: syntax error
autonomoussystem6: autonomous-system
already specified
autonomoussystem6: invalid autonomous
system value at <Value> not in range 1 to
65534
autonomoussystem6: out of range
autonomoussystem6: syntax error
5-22
Routing Protocol Error Messages (continued)
The specified MED number is invalid. Specify within the range of 0 to
65535.
<Metric>: Specified MED number.
The extended community ID number is invalid. Specify within the
range of 1 to 65535, or 0 to 4294967295.
<Value>: Specified ID number.
The specified LOCALPREF offset number is invalid. Specify within
the range of +1 to +65535 or -1 to -65535.
<Localpref>: Specified LOCALPREF offset number
The specified LOCALPREF number is invalid. Specify within the
range of 0 to 65535.
<Localpref>: Specified LOCALPREF number
The specified ASPATH value is invalid. Specify within the range of 1
to 8.
<Value>: Specified ASPATH number
The specified community count is over. Specify a value of 25 or less.
<Value>: Specified communities value
The number of extended communities to be defined exceeds the
maximum number of extended communities to be defined. Specify a
value of 25 or less.
<Value>: Extended communities value.
More than 255 values are defined in dot notation. Specify value
within the range of 0 to 255.
<Value>: Specified value
m>n or n is 0 in specifying of aspath_term {m ,n}. Specify the starting
value smaller than the terminating value. Or, specify terminating
value to other than 0.
<Value>: Specified terminating value (n)
m is 0 in specifying of aspath_term {m, n}, {m}, {m,}. Specify other
than 0.
<Value>: Specified starting value (m)
The parameter-specified range is exceeded in the
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
Syntax error
The autonomoussystem definition is duplicated. Delete one of the
two.
AS number specification range is illegal. Specify value within the
range of 1 to 65534.
<Value>: Specified As number
The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
Syntax error
The autonomoussystem6 definition is duplicated. Delete one of the
two.
IPv5 AS number specification range is illegal. Specify value within
the range of 1 to 65534
<Value>: Specified As number
The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
Syntax error
input
command
GR2K-GA-0014
Ver. 07-02