Table 1-56 Applicable Parameters By Upper Protocol - Hitachi GR2000 Series Configuration Commands

To show the first free entry No.:
Parameters
Filters can be set based on information in the TCP, UDP, ICMP, IGMP packets. See
Table Table 1-56 for a list of parameters and conditions.

Table 1-56 Applicable Parameters by Upper Protocol

Parameter
Filter list no.
-forward | -drop
-protocol <No.>
-payload_length_upper_limit <Payload Length> |
-payload_length_lower_limit <Payload Length>
-tos <Value>
-ip_pair | -ip_pair_off
-ip_source <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
-ip_destination <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
-port_pair | -port_pair_off
-port_source <Port No.> [-<Port No.>]
-port_destination <Port No.> [-<Port No.>
-pair_synchronized_off | -pair_synchronized
-ack_check_off | -ack_check
-syn_check_off | -syn_check
-icmp_type <No.>
-icmp_code <No.>
-igmp_type <No.>
-branch_index <No.>
-policy_routing <Interface Name> <IP Address>
policy_routing-group <policy-Group-Name>-
-replace_tos <New Tos>
§=must be set
°=can be set
u=can be set; default when omitted
No symbol =cannot be set
Number=set number
Description:
Default:
Range of value:
GR2K-GA-0014
Ver. 07-02
Specifies the filter list number.
Undefined (mandatory input except when used with show
subcommand).
1-1024
Filtering/QoS Information
TCP UDP ICMP IGMP
§ § § §
u u u u
6 17 1 2
° ° ° °
° ° ° °
u u u u
° ° ° °
° ° ° °
u u
° °
° °
u u
u
u
°
°
°
° ° ° °
° ° ° °
° ° ° °
° ° ° °
Undefined
§
u
°
°
°
u
°
°
°
°
°
°
1-111