Hitachi GR2000 Series Configuration Commands page 199

Examples
1. Setting parameters:
a. When the interface name is
LINE number 0, LINE name: priority on office 1 specifies the QoS queue list
name queueA:
b. When the interface name is <DLCI Name>: serial circuit, NIF number 1, LINE
number 0, line speed 9600bps, LINE name: office2, protocol: Frame Relay,
DLCI number 16, DLCI name: round-robin on dlci1 specifies the QoS queue
list name queue B:
c. When the interface name is <Timeslot Name>: J2 circuit, NIF number 2,
LINE number 0, LINE name: office3, timeslot number 1, timeslot width 1,
timeslot name: section1, protocol : priority on PPP specifies QoS queue list
name queueC:
GR2K-GA-0014
Ver. 07-02
: Ethernet circuit, NIF number 0,
<Line Name>
Filtering/QoS Information
1-157