Table 1-24 General Port Number - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
Default:
Range of value:
Transmitter port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default:
Range of value:
Destination port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default:
Range of value:

Table 1-24 General port number

Port Number (Decimal)
53/tcp 53/udp
110/tcp 10/udp
TCP single-direction communication permit (having one ACK flag) is
designated.(note1)
Default:
Range of value:
Virtual circuit establishment permit (having one SYN fla) is designated.(Note1)
1-32
Sets the VLAN ID of tag-VLAN.
The list information that sets this parameter should be set in
(Inbound) and specified as the flow detection conditions on the
input side.
Undefined. (VLAN ID is not contained in the flow detection
conditions.)
1 to 4095 (This parameter is valid only in RP-C and RP-D.)
None (the transmitter port number is not included in the flow
detecting condition.)
0 to 65535 (decimal). (Please refer to Table 1-24.)
None (the transmitter port number is not included in the flow
detecting condition.)
0 to 65535 (decimal). (Please refer to Table 1-24.)
Name
20/tcp File Transfer [Default Data]
21/tcp File Transfer [Control]
22/tcp Secure Shell Login
23/tcp Telnet
25/tcp Simple Mail Transfer
Domain Name Server
80/tcp World Wide Web HTTP
Post Office Protocol - Version 3
161/udp SNMP
None (the ACK flag is not included in the flow detecting
condition.)
None
GR2K-GA-0014
Ver. 07-02