Table 1-36 List Of Parameters That Can Be Set For Each Rp Type Using Ipv4 Qos Information - Hitachi GR2000 Series Configuration Commands

Table 1-36 List of Parameters that Can Be Set for Each RP Type Using IPv4 QoS
Item
Main Item Sub-Item
Flow Flow detection
detection conditions
conditions
Protocol number
Protocol TCP
Protocol UDP
Protocol ICMP
Protocol IGMP
Source IP address
Destination IP
address
DSCP
precedence
Flow IP user data length {upper | lower} <Length>
detection
Source port
conditions
number
(continued)
Destination port
number
ICMP type
ICMP code
IGMP type
exp [ROUTE-OS7]
User priority
Important packet
GR2K-GA-0014
Ver. 07-02
Information
Parameter
ip
<protocol No.>
tcp
udp
icmp
igmp
<IP_Source>
<IP_Destination>
dscp <DSCP_Value>
precedence
<precedence_Value>
<Port_Source>
<Port_Destination>
<ICMP_Type>
<ICMP_Code>
<IGMP_Type>
exp <EXP_Value>
user_priority <No>
premium
RP-A1 RP-C, RP-D
Input Output Input
Side Side Side
-- --
-- -- --
-- --
Filtering/QoS Information
RP-C6, RP-D6,
RP-CV, RP-DV
Output Input Output
Side Side Side
-- --
-- --
--
1-61