Hitachi GR2000 Series Configuration Commands page 118

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Contract band specification:
Specifies to monitor traffics from end users by using ISP and discard the
packets breaching the contract band. Specifies that packets with the
interface name of Tokyo and the transmitter address of 10.10.10.0/24 to be
monitored in the contract band of 128 kbit/s.
Specification of queuing priority when contract band is breached:
Specifies that packets breaching the contract band be discarded more easily
when the output lines are congested. Monitors the packets with the interface
name of Tokyo and the transmitter address of 10.10.10.0/24 in the contract
band of 5,000 kbit/s and changes the queuing priority to one at breach.
Specifying the maximum band restriction + minimum band assurance:
Sets the maximum band restriction and the minimum band assurance by
each end user by using ISP. Specifies the users with the interface name of
Tokyo and the transmitter addresses of 10.10.10.1 and 10.10.10.2 with the
maximum band restriction band of 128 kbit/s and the minimum band
assurance band of 64 kbit/s.
1-76 GR2K-GA-0014
Ver. 07-02