Table 1-30 General Protocol Number - Hitachi GR2000 Series Configuration Commands

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Default:
Range of value:

Table 1-30 General Protocol Number

Protocol No.
1
6
8
17
58
88
89
Transmitter IPv6 address is designated.
If address to be designated is one:
If address is designated by range:
If designated by sub-net prefix length:
If all IPv6 addresses are designated: any
Default:
Range of value:
Designated filter conditions by Transmitter IPv6 address.
If address to be designated is
If address is designated by range
If designated by sub-net mask length:
If all IPv6 addresses are designated: any
Default:
1-46
No default is possible.
0 to 255 (decimal). (Please refer to Table 1-30.)
However, in case of the IPv6 filter list, the protocol number
showing the IPv6 option header cannot be designated.
Specifically, the numbers are 0 (relaying point option header),
43 (route control header), 44 (fragment header), and 60
(ending point option).
Protocol
ICMP
TCP
EDP
UDP
ICMPv6
IGRP
OSPF
No default is possible.
IPv6 address
(nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn):
0:0:0:0:0:0:0:0-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Prefix length (aaa): 0-128
No default is possible.
GR2K-GA-0014
Ver. 07-02

Advertisement

Table of Contents
loading

Table of Contents