Hitachi GR2000 Series Configuration Commands page 303

Description:
Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Examples
1. Setting parameters
To set extended filtering (
interface sk3:
2. Changing parameters
To change extended filtering number 2 entry information to
to 10:
GR2K-GA-0014
Ver. 07-02
This parameter configures bit patterns (hexadecimal) that
check filtering.
0
0-0xffffffffffff
Configures bit patterns (hexadecimal) that check filtering.
0
0-0xffffffffffff
Configures data length (octet number) of the field that checks
filtering. This is valid only when chosen type is user.
This parameter cannot be omitted when the user is specified
by filter1 to 3.
1-6
Configures offset value of the field that checks filtering. Offset
value is expressed by setting recipient MAC address's first
octet to . When the frame is Ethernet or IEEE802.3, the
0
recipient MAC address's first octet matches the first octet of
the MAC header. When the frame is FDDI, the first MAC
header octet is FC field, so you have to set the first MAC
address octet following FC field to
chosen type is user.
0
0-56
) for user defined fields as filtering to filter1 against
yes
IPX/Bridge Information
. This is valid only when
0
and the value
forward
2-37