Hitachi GR2000 Series Configuration Commands page 462

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-8
protocol out of range
QoS IP configuration is already defined.
Relation between regular protocol and
premium protocol are inconsistent.
replace_exp out of range
replace_tos out of range
replace_user_priority out of range
tos out of range
upc bandwidth is not in range of 0 to 2400000. The input value is out of the prescribed range. Set the range of 0 to
upc_burst is not in range of 0 to 131072.
upper out of range
user_priority out of range
vlan out of range
Can not set replace_tos or replace_dscp
because penalty_discard is already defined.
Can not set tos_map or dscp_map because
penalty_discard is already defined.
replace_dscp out of range
penalty_dscp out of range
dscp out of range
Can not set IPv4 tos and exp.
Can not set IPv4 exp.
Can not set IPv4 replace_exp.
Can not set IPv4 tos_map.
Can not set IPv4 replace_tos.
Can not set IPv4 penalty_tos.
Can not set IPv4 tos_map and penalty_tos.
5-72
Flow Information Error Messages (continued)
The input value is out of the prescribed range. Set the range of 1 to
255 to the protocol number.
flow qos cannot be set because qos_ip has been set. To set flow
qos, delete qos_ip.
The relation between the protocol of normal packet flow detecting
condition and the protocol of important packet flow detecting
condition is in disagreement. Make the protocol of normal packet flow
detecting condition an "IP" or have the both protocols agree with
each other.
The input value is out of the prescribed range. Set the range of 0 to 7
to the exp field rewrite value.
The input value is out of the prescribed range. Set the range of 0 to
255 to the tos rewrite value.
The input value is out of the prescribed range. Set the range of 0 to 7
to the VLAN priority rewriting value.
The input value is out of the prescribed range. Set the range of 0 to
255 to the tos.
2400000 to the bandwidth.
The input value is out of the prescribed range. Set the range of 0 to
131072 to the burst size.
The input value is out of the prescribed range. Set the range of 0 to
65535 to the upper value of IP user data length.
The input value is out of the prescribed range. Set the range of 0 to 7
to the VLAN priority value.
The input value is out of the prescribed range. Set the range of 1 to
4095 to vlan.
Tos rewrite value or dscp rewrite value cannot be set because the
contract band breaching queuing value has been defined. To set the
contract band breaching queuing value, delete tos rewrite value or
dscp rewrite value.
Tos_map or dscp_map cannot be set because the contract band
breaching queuing value has been defined. To set the contract band
breaching queuing value, delete tos_map or dscp_map.
The input value is out of the prescribed range. Set the range of 0 to
63 to the dscp rewrite value.
The input value is out of the prescribed range. Set the range of 0 to
63 to the contract band breaching dscp rewrite value.
The input value is out of the prescribed range. Set the range of 0 to
63 to the dscp value.
Tos value and exp field value cannot be specified in the entry of the
IPv6 flow information.
Exp field value cannot be specified in the entry of the IPv6 flow
information.
Exp field value cannot be specified in the entry of the IPv6 flow
information.
tos_map cannot be specified in the entry of the IPv6 flow information.
Tos rewrite value cannot be specified in the entry of the IPv6 flow
information.
Contract band breaching tos rewrite value cannot be specified in the
entry of the IPv6 flow information.
Contract band breaching tos rewrite value and tos_map cannot be
specified in the entry of the IPv6 flow information.
GR2K-GA-0014
Ver. 07-02