Hitachi GR2000 Series Configuration Commands page 496

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-25 Other Error Messages (continued)
Not a directory.
Operation not permitted.
Permission denied.
Resource temporarily unavailable.
syntax error line <Line No.>
Text file busy.
Too many levels of symbolic links.
Too many open files in system.
*1: Refer to GR2000 Operations Commands, Vol. 1 for show mc command.
*2: Refer to GR2000 Operations Commands, Vol. 1 for show rm cpu command.
*3: Refer to GR2000 Operations Commands, Vol. 1 for show router command.
5-106
Specified file name invalid. Enter a correct file name.
Because operation configuration information written in memory is
being edited, operation is not permitted.
Permission denied. Specified file can not be accessed.
Release access control for file or directory by using Operations
Guide -New Syntax Operation Command, Vol. 1- chmod command.
System resource running short. Wait for access, then execute again.
One of the following problems may occur regarding the configuration
information of <Line No.>. Define the correct configuration
information.
1. The syntax or the range of values is invalid. Define the correct
syntax or value.
2. The maximum definable entry count is exceeded. Define the
value within the set range.
3. The required configuration information has not been defined.
Define the lacking configuration information.
4. The same configuration information has been defined more than
once. Deleted unneeded configuration information.
Unavailable access to specified file. Wait for access, then execute
again.
Specified file can not be detected. Decrease symbolic links.
System resource running short. Wait for access, then execute again.
GR2K-GA-0014
Ver. 07-02