Table 1-48 General Protocol Number - Hitachi GR2000 Series Configuration Commands

Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
Description:
Default:
Flow Detecting Condition Parameters
Description:
Default:
Range of value:

Table 1-48 General Protocol Number

Protocol No.
1
6
8
17
58
88
89
GR2K-GA-0014
Ver. 07-02
Default is possible only in the indicated case. All the lists are
displayed at default.
1 to 20,000 (ten-decimals)
The range of the list number to be treated for display
corresponds to the whole list number including IPv4 QoS and
IPv6 QoS lists.
The range of the list number to be displayed corresponds to all
list numbers.
IPv4 QoS list: 1-20000 (decimal)
IPv6 QoS list: 40001-60000 (decimal)
Displays the blank list number.
Cannot be omitted when the blank list number is displayed.
Displays the top blank list number in the specified range.
Cannot be omitted when the top list number of a blank list
number is displayed.
Specifies the high-order protocol number of the protocol name.
If all the protocols are taken as the object, ip is specified.
No default is possible.
0 to 255 (ten-decimals). (refer to Table 1-48.) In the case of an
IPv6 QoS list, protocol numbers that show the IPv6 option
header cannot be designated. Specifically, they are 0 (relay
point option header), 43 (route control header), 44 (fragment
header) and 60 (terminal point option).
Protocol
ICMP
TCP
EGP
UDP
ICMPv6
IGRP
OSPF
Filtering/QoS Information
1-89