Attaching And Detaching The Power Cable; Figure 2-6 Connecting A Power Cable To The Gr2000-B; Figure 2-7 Locking The Power Cable Into Place - Hitachi GR2000-B Series Quick Start Manual

2.6

Attaching and Detaching the Power Cable

DANGER:
1. As shown in Figure 2-6, attach the power cable to the connector at the back of
the GR2000-B.
Metal bail to lock
power cable in
place

Figure 2-6 Connecting a Power Cable to the GR2000-B

2. As shown in Figure 2-7, lock the power cable connector into place on the
GR2000-B chassis.
Push down the locking metal
bail toward the direction
indicated by the arrow in the
figure below.

Figure 2-7 Locking the Power Cable into Place

Note: When pulling a cable out of the connector, follow the procedures above in
*
reverse order.
GR2K-GA-0008
Rev. 1.00
To prevent the possibility of electric shock, use only grounded power
outlets.
Power cable
Setup Process
AC Connector
2-7