Attaching And Detaching The Power Cable; Attaching The Power Cable For The Gr2000-1B, Gr2000-2B, Or Gr2000-2B; Figure 4-17 Connecting A Power Cable (Gr2000-1B, Gr2000-2B, And Gr2000-2B+); Figure 4-18 Locking The Power Cable Into Place (Gr2000-1B, Gr2000-2B, And Gr2000-2B+) - Hitachi GR2000-B Series Installation Manual

4.5

Attaching and Detaching the Power Cable

DANGER:
4.5.1

Attaching the Power Cable for the GR2000-1B, GR2000-2B, or GR2000-2B+

(1) Attaching Cables
Step 1. As shown in Figure 4-17, attach the power cable to the connector at the
back of the GR2000-B.

Figure 4-17 Connecting a Power Cable (GR2000-1B, GR2000-2B, and GR2000-2B+)

Step 2. As shown in Figure 4-18, lock the power cable connector into place (Japan
only).
Figure 4-18 Locking the Power Cable into Place (GR2000-1B, GR2000-2B, and
GR2K-GA-0007
Rev. 5.00
To prevent the possibility of electric shock, use only grounded power
outlets.
GR2000-2B+)
AC Connector
Metal bail to lock the power
cable in place (Japan only)
Setup
Note:
The locking
metal bail is not
attached to
products sold
outside of
Japan.
4-15