Figure 4-7 Installation Of The Router Into The Cabinet Rack; Figure 4-8 Attaching The Router To The Cabinet Rack - Hitachi GR2000-B Series Installation Manual

Hitachi Gigabit Router GR2000-B Series Installation Guide
Step 3. As shown in Figure 4-6, install the router into a cabinet rack by sliding the
rack-mount bracket (L) through the guide bracket.
Rack-Mount
Bracket (L)

Figure 4-7 Installation of the Router into the Cabinet Rack

DANGER:
Note: For cooling conditions required for rack mounting, see 2.9, "Cooling
*
Considerations," on page 2-9.
Step 4. As shown in Figure 4-6, firmly attach the router to the cabinet rack. Use the
M5 screws that were supplied with the router.
Rack Mounting Screws
(M5 2 pieces)

Figure 4-8 Attaching the Router to the Cabinet Rack

4-8
Guide Bracket
Make sure that the router is in a stable position when mounting it into the
rack. If not, the router could fall and cause physical injury and damage to
itself and other equipment.
Cabinet Rack
Router
Cabinet Rack
Router
GR2K-GA-0007
Rev. 5.00