Table of Contents
Advertisement
This chapter explains about how to set up the GR2000-B models.
4.1, "Required Tools," on page 4-1,
4.2, "Dangers, Cautions, and Notes Regarding Setup," on page 4-2,
4.3, "Installing the GR2000-B on a Table or Desk," on page 4-3,
4.4, "Mounting the GR2000-B in a Rack," on page 4-4,
4.5, "Attaching and Detaching the Power Cable," on page 4-15,
4.6, "Installing a Memory Card," on page 4-18,
4.7, "Attaching and Detaching the GBIC," on page 4-24,
4.8, "Connecting a Setup Terminal to the GR2000-B," on page 4-27,
4.9, "Connecting Interface Cables to the GR2000-B," on page 4-28,
4.10, "Turning the Power On or Off," on page 4-30, and
4.11, "After Installation," on page 4-32.
4.1
Required Tools
The only tools required to install and set up a GR2000-B router are:
A #2 Phillips screwdriver for attaching the GR2000-B to a rack,
A medium-sized flat-blade screwdriver for attaching cables,
A wrist strap to prevent static electricity.
GR2K-GA-0007
Rev. 5.00
Chapter 4
Setup
4-1
Advertisement
Table of Contents
