Terminal Listing - Hitachi SJ300 Series Instruction Manual

4–10
Connecting to PLCs and Other Devices

Terminal Listing

Symbol Code
RV 01 Reverse Run/Stop
CF1 02 Multi-speed select, Bit 0 (LSB)
CF2 03 Multi-speed select, Bit 1
CF3 04 Multi-speed select, Bit 2
CF4 05 Multi-speed select, Bit 3 (LSB)
JG 06 Jogging
DB 07 External signal for DC injection
braking
SET 08 Set (select) second motor data
2CH 09 2-stage accel and decel
FRS 11 Free-run stop
EXT 12 External trip
USP 13 Unattended start protection
CS 14 Commercial power source
SFT 15 Software lock
AT 16 Analog input voltage/current sel.
SET3 17 Set (select) 3rd motor data
RS 18 Reset inverter
STA 20 Start (3-wire interface)
STP 21 Stop (3-wire interface)
F/R 22 FW, RV (3-wire interface)
PID 23 PID ON/OFF
PIDC 24 PID Reset
CAS 26 Control gain setting
UP 27 Remote control Up func.
DWN 28 Remote control Down func.
UDC 29 Remote control data clearing
OPE 31 Operator control
SF1–7 32–38 Multi-speed bits 1 to 7
OLR 39 Overload restriction
TL 40 Torque limit enable
TRQ1 41 Torque limit select, bit 1 (LSB)
TRQ2 42 Torque limit select, bit 2 (MSB)
PPI 43 P / PI mode selection
BOK 44 Brake confirmation signal
ORT 45 Orientation (home search)
LAC 46 LAC: LAD cancel
PCLR 47 Position deviation reset
STAT 48 Pulse train position cmd enable
Use the following table to locate pages for intelligent input and output material in this chapter.
Intelligent INPUTS
Name
Intelligent OUTPUTS
Page Symbol Code
4–12 RUN 00 Run signal
4–13 FA1 01 Freq. arrival type 1 –
constant speed
4–13
4–13 FA2 02 Freq. arrival type 2 –
over-frequency
4–13
4–16 OL 03 Overload advance notice signal
4–17 OD 04 Output deviation for PID control
AL 05 Alarm signal
4–18 FA3 06 Freq. arrival type 3 – at freq.
4–19 OTQ 07 Over-torque signal
4–20 IP 08 Instantaneous power failure signal
4–21 UV 09 Under-voltage signal
4–22 TRQ 10 In torque limit signal
4–23 RNT 11 Run time over
4–25 ONT 12 Power-ON time over
4–26 THM 13 Thermal alarm signal
4–18 BRK 19 Brake release signal
4–27 BER 20 Brake error signal
4–29 ZS 21 Zero speed detect
4–29 DSE 22 Speed deviation maximum
4–29 POK 23 Positioning completion
4–30 FA4 24 Freq. arrival type 4 –
over-frequency (2)
4–30
4–31 FA5 25 Freq. arrival type 5 –
at frequency (2)
4–33
4–33 OL2 26 Overload advance notice
signal (2)
4–33
4–34
4–13
4–35
4–37
4–37
4–37
4–31
4–39
4–41
4–41
4–41
4–41
Name Page
4–43
4–44
4–44
4–46
4–47
4–48
4–44
4–50
4–51
4–51
4–54
4–54
4–54
4–55
4–58
4–58
4–58
4–58
4–58
4–44
4–44
4–46