Assembling The Belt; Checking And Adjusting Mower Deck Ground Pressure - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Assembling the belt

Rider ProFlex
1
• Position the belt from the front and let the front
end of the belt hang around the hook guard's
handle.
• Fit the belt on the intermediate pulley and
against the support wheel.
2
• Fit the steering plate under the support wheel
and tighten the bolts using two 13 mm socket
spanners.
• Lay the belt in position over the drive pulley and
tensioning pulley. Attach the belt tensioning
spring.
3
Hook on the spring for the blade brake.
www.mymowerparts.com
Checking and adjusting mower deck
ground pressure
1
Check tyre pressures (60 kPa)
Place a set of bathroom scales under the mower
deck's frame (front edge) so that the deck rests on
the scales.
2
Adjust the mower deck's ground pressure with the
adjusting nuts (on ProFlex adjusting screws)
placed behind the front wheels on both sides of the
machine. The ground pressure should be the same
on both sides, between 12 and 15 kg.
Reparation instructions
47
Svenska –