Connecting To A Pc - Hitachi LCD Monitor User Manual

INSTALLATION INSTRUCTIONS (continued)

Connecting to a PC

(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See "PRODUCT SPECIFICATIONS" concerning the specifications of this device.
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output terminal
of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask
the personal computer manufacturer or your local retail dealer.
Speaker (R)
Power cord
Connecting to a PC Device
To signal
output
terminal
(DVI)
• Setting
RGB1: DVI-PC
RGB2: RGB
For details, refer to 51
Monitor (rear panel)
Power cable
connector
DIGTAL INPUT
RGB 1
(DVI)
To signal To audio
output output
terminal terminal
(D-sub)
PC
52
48 ~ 52
AUDIO IN
ANALOG INPUT
RGB 2
(D-SUB)
Connecting to an Audio Visual Device
To signal
output
terminal
(DVI)
• Setting
RGB1: DVI-STB
RGB2: Component
For details, refer to
Speaker (L)
3.5 mm
Stereo
mini jack
To audio
output
terminal
(Example)
DVD Player
50 51
15