Picture Menu (Rgb Mode) - Hitachi LCD Monitor User Manual

OPERATING INSTRUCTIONS (continued)

PICTURE MENU (RGB mode)

Selected characters
Contrast
Brightness
Color
Tint
Picture Enhancement
Color Temperature
Color Temp. Adjust
Red
Amplitude Green
Blue
Red
Cut Off Green
Blue
Back Light
Reset
38
Narrows the gap between
brightness and darkness.
Black is subdued for increased
overall darkness.
Decreases color intensity.
Enhances red and weakens
green.
Brighter scene is decreased in
reddish color.
Brighter scene is decreased in
greenish color.
Brighter scene is decreased in
bluish color.
Dark scene is decreased in
reddish color.
Dark scene is decreased in
greenish color.
Dark scene is decreased in
bluish color.
Darkens the screen.
(off the function)
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Increase color intensity.
Enhances green and weakens
red.
Brighter scene is increased in
reddish color.
Brighter scene is increased in
greenish color.
Brighter scene is increased in
bluish color.
Dark scene is increased in
reddish color.
Dark scene is increased in
greenish color.
Dark scene is increased in
bluish color.
Brightens the screen.
(waiting to reset)
Setup hint
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
green to magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear.
We recommend to set at [+31].
Adjust to preference.
Adjust to preference.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be grayed out.
Adjust for most realistic skin color.
Sets the clarity of small details to the desired level.
Normally set to Normal.
Turn On when you wish to change color temperature is required to
adjust depending on the user's preference.
Adjust color temperature depending on the user's preterence. These
settings are independently stored in each of the 4 Color Temperature
modes.
Adjust to preference (for the maximum visibility).
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
SELECT