Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)
Selected characters
Auto Tuning
Mode
Search
Manual Tuning
Position
Frequency
Name
Sound System
Color System
Skip
NR
Antenna Att
Decreasing the frequency data
Fine Tuning
for the main tuner
Sort
(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
(A Line of position List)
Teletext Language
Auto Off
30
Select the channel entry method between position setting or direct setting.
And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199 and
• If [Direct] is selected, the screen display will be C** at the channel 0~99
Press the OK button and it starts the auto tuning.
Set the position number (1~199 and AV00) or channel number (C**, S**) by
( + ) ( - ) CHANNEL UP/DOWN button.
• If [Position] has been selected, search the frequency here by pressing
• If [Direct] has been selected, this function will be not available (grayed out).
This is used to input the name of the TV station within 5 letters. After fixing
the cursor on the first digit, select a letter by
move to next digit by
finished.
• Selectable letters are "0"~`"9", "A"~`"Z", "+", "–", " "(blank), ","(comma) and
Select the sound system through the 5 different settings.
Select the color system through the 5 different settings.
If this is set to On, that position will be skipped while selecting positions by
CHANNEL UP/DOWN button.
This is automatically set to On for those non-broadcasting channels.
If this is set to On, it helps to reduce the noise interference visible on the
screen, especially in the weaker signal reception areas.
If this is set to On, it helps to reduce the noise inter ference visible on the
screen in case of strong airwave.
Increasing the frequency data for
After completing the fine-tuning, press the RETURN button to exit this mode.
the main tuner.
• The variable range is -56 ~ +56.
Press OK button at a line that is required to change order, then the
characters will change to green. And move it up or down in the list by
pressing
Press the RETURN button to exit.
Select the teletext language, depending on the area utilized, through the 4
settings; West Europe, East Europe, Cyrillic and Greek/Turkish.
• Select West Europe when watch in Singapore, Australia, Malaysia, and so
If this is set to On, the power will be turned off when there is no transmission
signal and no operation for about 10 minutes in the TV mode.
Setup hint
AV00).
and S** at the channel 100~199.
and
buttons.
ADJUST button. Press the OK button again after
"."(period).
and
SELECT buttons. And press OK button to complete it.
on.
and
SELECT buttons and
Advertisement
Table of Contents
