Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))
Selected characters
Auto Adjust*
Moves the horizontal position to left.
Horizontal Position
Moves down the vertical position
Vertical Position
Reduces the dot clock frequency
(shrinks the right side).
Horizontal Clock
Slows the dot clock phase (shifts
slightly to left).
Clock Phase
Reset
Input Level
Frequency Display
WVGA Type
WXGA Mode
32
Pressing the OK button here,
Automatic regulation is started.
Moves the horizontal position to right.
Moves up the vertical position.
Increases the dot clock frequency
(expands the right side).
Advances the dot clock phase (shifts
slightly to right).
(off the function)
O ff
Adjust
Horizontal Position. Vertical Position. Horizontal Clock and Clock
Phase are adjusted automatically.
Adjust the left-side display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It's not available (grayed
out) for RGB1 (DVI-PC).)
Adjust the vertical display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It's not available (grayed
out) for RGB1 (DVI-PC).)
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
RGB1 (DVI-PC).)
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
RGB1 (DVI-PC).)
The original factory settings for the items of this Menu page can
(waiting to reset)
be restored by pressing the OK button.
Normally set to 0.7 V. If white is found to spread across the
screen, set to 1.0 V. (This is effective only for RGB2.)
Set this to Off if the frequency information of the Input Signal
Screen Display is not required.
This is only available for W-VGA signal.
When it is set to On, the display area mode can be selected Full
or Real. (With RGB1 INPUT, the screen remains the same. RGB2
(ANALOG) INPUT only)
This is only available for W-XGA signal.
(RGB2 (ANALOG) INPUT only)
Setup hint
Advertisement
Table of Contents
