Table of Contents
Advertisement
SETUP MENU
MENU
Selected characters
Horizontal Position
Frequency Display
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
Downloaded from
www.Manualslib.com
OPERATING INSTRUCTIONS (continued)
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
(Menu)
Auto Adjust*
Moves the horizontal position
to left.
Moves down the vertical
position.
Vertical Position
Reduces the dot clock
frequency (shrinks the right
side).
Horizontal Clock
Slows the dot clock phase
(shifts slightly to left).
Clock Phase
Reset
(off the function)
0.7V
Input Level
WVGA Type
Vertical Filter
Frequency Mode
RGB1
RGB2
manuals search engine
Setup
Auto Adjust
OK
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select
Return
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select
Return
Setup
Input Level
Frequency Display
WVGA Type
Vertical Filter
Frequency Mode
RGB1
RGB2
Select
Set
Adjust
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Pressing the OK button here,
Phase are adjusted automatically.
Automatic regulation is started.
Moves the horizontal position
Adjust the left-side display position.
to right.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Moves up the vertical position. Adjust the vertical display position.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Increases the dot clock
frequency (expands the right
Adjust for maximum character clarity.
side).
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Advances the dot clock phase
Adjust for clear character visibility.
(shifts slightly to right).
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
The original factory settings for the items of this Menu page can be
(waiting to reset)
restored by pressing the OK button. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the screen, set
1.0V
to 1.0 V. (This is effective only for RGB2.)
Set this to Off if the frequency information of the Input Signal Screen
Off
On
Display is not required.
This is only available for W-VGA signal.
Off
On
When it is set to On, the display area mode can be selected Full or
Real.
Off
On
Turn On when concerned about screen flicker.
Movie
PC
Set to Movie when viewing moving images on a personal computer.
Optional (grayed out)
Optional (grayed out)
Adjust
0
OK
+ 31
– 20
10
Reset
Exit
Horizontal Position
Next / Prev
Adjust
Adjust
OK
0
+ 31
– 20
10
Reset
Exit
Clock Phase
Next / Prev
Adjust
0.7V
Off
Off
On
Movie
DVI-PC
RGB
Return
Setup hint
0
Return
10
Return
Advertisement
Table of Contents
