Table of Contents
Advertisement
Actions to Correct Abnormal Displays
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the
adjustments suggested below. (only for RGB2)
Symptom 1
Adjustment
procedure
• The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Symptom 2
Adjustment
procedure
Downloaded from
www.Manualslib.com
TROUBLESHOOTING (continued)
Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1).
The display image appears flowing (figure 2) (RGB input).
Figure 1
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
Example
abcdefgABCDEFGabcd
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
3) Press the
SELECT button and select Setup.
4) Press the OK button. The Setup Menu will be displayed.
5) Press the
SELECT button and select Horizontal Clock.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock adjustment.)
6) Press the
or
ADJUST buttons and search for clear characters over the entire screen.
7) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
Text displayed across the screen appears blurred in its entirety (figure 2).
A fine pattern flickers when displayed on the screen (figure 3).
Figure 2
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
Example
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
3) Press the
SELECT button and select Setup.
4) Press the OK button. The Setup Menu will be displayed.
5) Press the
SELECT button and select Clock Phase.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
6) Press
or
ADJUST buttons to make the text appear
clean across the screen.
manuals search engine
Vertical
Before adjustment
streaks
Some characters
are blurred.
After adjustment
ABC
All characters appear
ABC
B
crisp now.
After adjustment
ABC
ABC
All characters are
blurred.
Before adjustment
Figure 3
ABC
ABC
After adjustment
ABC
6) Press
without flickering.
Before adjustment
After adjustment
or
ADJUST buttons to make the text appear
Advertisement
Table of Contents
