Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (continued)
Selected characters
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Contrast Mode
Reset
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Color
Color Temp. Adjustment
Amplitude
Cut Off
Downloaded from
www.Manualslib.com
Dynamic
Narrows the gap between
brightness and darkness.
Black is subdued for
increased overall darkness.
Darkens colors.
Soft
Enhances red and weakens
green.
Cool
Normal
Normal
Auto
(off the function)
Off
Low
Off
Off
Off
Low
Off
Off
Brighter scene is decreased in
Red
reddish color.
Brighter scene is decreased in
Green
greenish color.
Brighter scene is decreased in
Blue
bluish color.
Dark scene is decreased in
Red
reddish color.
Dark scene is decreased in
Green
greenish color.
Dark scene is decreased in
Blue
bluish color.
manuals search engine
Dynamic: This setting is best for very bright ambient lighting.
Natural
Natural: This setting is for normal lighting conditions.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
Broadens the gap between
white to magenta. This special mode is better for dark scenes.
brightness and darkness.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.
Adjust to taste.
Black is set off for increased
overall brightness.
Lightens colors.
Adjust to taste.
Normally set to Centre position Shift to the minus (-) side for a softer
Sharp
effect and plus (+) for sharper picture.
This is not available to adjust when receiving PAL/SECAM signal.
Enhances green and weakens
Then the character will be grayed out.
red.
Adjust for most realistic skin color.
Warm
Black / White
Normally set to Cool.
Dynamic:Emphasizes the differences between video shadings to
improve the feeling of contrast.
Dynamic
Normal : The gradation of an image is reproduced as faithfully as
possible.
Auto:Detects image brightness and automatically adjusts for natural
brightness.
The original factory settings for the items of this Menu page can be
(waiting to reset)
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
High
Performs color signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.
On:Automatically detects the movie film material and faithfully
reproduces the original film image.
On
Off:Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn On
On
to reduce the discolorations in fine picture detail and provides purer
color.
Adjusts the sharpness of the picture signal.
Middle
High
Adjusts the sharpness of the color signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the color to maintain constant color
On
levels. It also maintains natural flesh tones while preserving fidelity of
background colors.
Turn On when you wish to change color temperature depending on
On
the user's preference.
Brighter scene is increased in
reddish color.
Brighter scene is increased in
greenish color.
Brighter scene is increased in
Adjust color temperature depending on the user's preference. These
bluish color.
settings are independently stored in each of the 4 Color Temperature
Dark scene is increased in
modes.
reddish color.
Dark scene is increased in
greenish color.
Dark scene is increased in
bluish color.
Setup hint
cursor
Advertisement
Table of Contents
