Siemens Gigaset A580IP Manual page 27

First steps
Completing the VoIP settings
After the entries have been completed, the handset reverts to idle status.
¤
Test whether your VoIP data is complete and has been stored in the phone cor-
rectly.
Calling via VoIP:
Enter a number using the handset keypad and press and hold the Talk key c.
If a VoIP connection cannot be established, a corresponding message is shown in
the display.
You can now use your phone to make calls via the fixed line network and
the Internet! Callers can reach you on your fixed line number and your
VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must be
permanently connected to the Internet.
u
If you have started the connection wizard via the menu, once the entries are
completed, press and hold the End Call key
status.
u
If you try to make a call via a VoIP connection that is not configured correctly,
the following VoIP status message will appear in the display:
VoIP config. error: xxx (xxx = VoIP status code). The various status codes and
their respective meanings are listed on
Please note
You can enter five additional VoIP accounts (VoIP phone numbers) via the Web
configurator later (
and the Gigaset.net number, your phone can then be reached via up to eight dif-
ferent phone numbers. You can assign the phone numbers to the individual
handsets that are registered with the base station as send and receive numbers
£
Page
(
26
Ð V
INT 1
Þ
Menu
£
Page 107). Together with your fixed line network number
122).
a
to return the handset to idle
Page 147.