Activating/Deactivating The Display Of Voip Status Messages; Checking The Base Station Mac Address - Siemens Gigaset A580IP Manual

Making VoIP settings on the handset

Activating/deactivating the display of VoIP status messages

If the function is activated, a VoIP status code for your service provider is displayed.
Activate the function if, for example, you have problems with VoIP connections. You
will receive a provider-specific status code, which supports the service when the
problem is analyzed. You will find a table with the possible status screens in the
appendix (
¢
§Menu§
~
Status on HS
a
ú For information on making the setting on the Web configurator,

Checking the base station MAC address

Depending on your network configuration, you may have to enter your base sta-
tion MAC address, for example, into your router's access Control list. You can check
your base station MAC address:
M 4 O M 5
§Menu§
The base station MAC address is displayed.
a
ú For information on checking your MAC address on the Web configurator,
£
Page
94
£
Page 147).
¢ ¢
Settings Base
Enter the system PIN and press
§OK§
Select and press
Press and hold (idle status).
Press and hold (idle status).
142.
¢
Telephony VoIP
§OK§
.
(‰ = on).
£
Page 142.