Opening Lists With The Message Key - Siemens Gigaset A580IP Manual

Using lists

Opening lists with the Message key

You can use the Message key f to open the following list selection:
u
Calls list
u
Network mailbox,
A separate list is displayed for each network mailbox.
Prerequisite: Its number is saved in the base station, it is switched on
£
( Page
assigned to the handset as a receive number.
An advisory tone sounds as soon as a new message arrives in a list. The f key
flashes (it goes off when the key is pressed). The message You have new messages
appears in the display in idle status.
List selection
The lists displayed after pressing the message key f depend on whether there
are any new messages.
f key does not flash (no new messages): All lists are displayed. Select a list with
q. To open, press
f key flashes (new messages received): All the lists that contain new messages
are displayed as well as the network mailbox lists, whose connection is assigned to
the handset as a receive number (Net AM Fixed Line, Net AM IP1,...).
Network Mailbox lists
If you select a Network Mailbox list and press
the network mailbox. For information on network mailboxes,
Calls list
The Calls list contains the last 20 numbers, depending on the type of list set
u
All calls
– answered calls
– unanswered calls
u
Missed calls
– unanswered calls
Multiple calls from the same number will be stored once in the list of missed calls
(the latest call). The number of calls from this number is shown in brackets after the
entry.
Multiple calls from the same number are stored several times in the list of answered
calls.
58
£
Page 67
127) and the corresponding VoIP/fixed line network number is
§OK§
.
§OK§
you will be connected directly to
£
Page 67.