•
Network information (Status/Information > Network
To access the Status/Information menu:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information. Press
Enter to select.
2.
Press Previous or Next until the screen displays your selected function. Press Enter to select.
Inventory (Status/Information > Inventory)
This option provides information on which slots have cartridges and which are empty. The second
line on the screen displays one of:
•
Full (tapes without bar code labels)
•
Bar code identification from the tape
•
Empty
The device has the following inventory locations:
•
Mailslot
•
Left magazine
•
Right magazine
•
Drive
Each location provides different information:
•
Drive or Mailslot: The screen display may read Mailslot AESO32L3, where AESO32L3 is an example
of the bar code number on the tape, or it may read Full or Empty.
•
Left or right magazine: The screen display may read Left Magazine or Right Magazine. The second
line on the display indicates which slots have a tape or are empty. Slots in the left magazine are
numbered 1-4 or 1-3, and slots in the right magazine are numbered 5-8 or 4-7. Each slot is rep-
resented by a character, as shown in
Table 17 Display indication definitions
Character displayed
X
-
m
M
C
!
NOTE:
If the mailslot is enabled, the storage slot count is reduced.
Table
17.
Definition
Slot has a tape
Slot is empty
Mailslot is enabled but does not have a tape
Mailslot has a tape
Slot has a cleaning tape
Media needs attention, often as a result of a damaged or incompatible cartridge
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide
Information)" on page 89
87