Start Up; Overview; Run Mode Display; Program Mode Display - Siemens SITRANS LR 300 Instruction Manual

Start Up

Overview

The SITRANS LR 300 has two modes of operation: RUN and PROGRAM.
After you have completed the installation procedures and powered up the
SITRANS LR 300, the unit starts in RUN mode and detects the distance from the
instrument flange to the target in meters. This is the default start-up display mode.

RUN Mode Display

Active Bar graph
representation of
material level,
0 to 100% of Span

PROGRAM Mode Display

Parameter type
Parameter value
Inactive
Bar graph
Programming indicator
7ML19985CL02
Confidence icons
SITRANS LR 300 – INSTRUCTION MANUAL
Reading
Percentage or Units,
dependent on
parameter number
Blinking "Heartbeat" ,
indicates device is running
Reading questionable,
appears during fail-safe
operation
Auxiliary reading
= Normal reading
= Fail-Safe operation
Index value
Percentage or Units,
dependent on parameter
value
Blinking "Heartbeat" ,
indicates device is running
EDIT icon indicates new
value being entered
Parameter number
Page 37