Volume Parameters (P050 to P055)
Set the SITRANS LR 300 to calculate readings based on reservoir volume rather than
level.
P050 Tank Shape
Enter the Tank Shape value that matches the monitored vessel or reservoir. (See chart on
next page.)
When Operation is LEVEL (P001 = 1), liquid (material) volume is calculated. When
Operation is SPACE (P001 = 2), remaining vessel capacity is calculated
In the RUN mode, readings are displayed in volumetric units. (See Maximum Volume
[P051] on page 60.) When percent is selected, the displayed volume reading is a
percentage of Maximum Volume.
Note:
Parameters P052 and P053 set tank dimensions A and L.
Page 58
(F = 0)
SITRANS LR 300 – INSTRUCTION MANUAL
7ML19985CL02