7. Position the integrated camera so that the camera is secured by the tab
camera aligns with the corresponding hole
the front bezel.
Figure 35. Installing the integrated camera
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 119.
Replacing the heat sink assembly
CAUTION:
The heat sink assembly might be very hot. Turn off the computer and wait three to five minutes to let
the computer cool before removing the computer cover.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Safety information" on page 1.
This section provides instructions on how to replace the heat sink assembly.
To replace the heat sink assembly, do the following:
100
ThinkCentre M83z Hardware Maintenance Manual
1
. Install the screw to secure the integrated camera to
2
and the screw hole in the