Table of Contents
Advertisement
5. Remove the hard disk drive. See "Replacing the 3.5-inch hard disk drive or hybrid drive" on page 79 or
"Replacing the 2.5-inch solid-state drive or hybrid drive" on page 81.
6. Remove the optical drive. See "Replacing the optical drive" on page 83.
7. Remove the converter board. See "Replacing the converter board" on page 85.
8. Remove the system-board shield. See "Removing and installing the system-board shield" on page 86.
9. Remove the rear I/O assembly. See "Replacing the rear I/O assembly" on page 87.
10. Remove the internal speakers. See "Replacing the internal speakers" on page 91.
11. Remove the VESA mount bracket. See "Removing and installing the VESA mount bracket" on page 94.
12. Remove the power supply assembly. See "Replacing the power supply assembly" on page 95.
13. Remove the system fan. See "Replacing the system fan" on page 97.
14. Disconnect the LCD-panel cable from the system board.
Figure 53. Disconnecting the LCD panel cable from the system board
15. Note the cable routing and disconnect other cables that might prevent your operation. Then, disconnect
the cables from the system board.
.
Chapter 8
Replacing FRUs
115
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
