Operating the OSD menu with the projector's OSD menu
Activating the OSD menu
►
Press the "Menu" button on the projector.
The basic menu is displayed.
Marking a function or submenu
►
Use the arrow buttons to move the cursor to the desired function or submenu.
Selecting a function or submenu
►
Press the "Source/Select" button.
The submenu opens, or you can make the desired settings.
Setting a function
►
Press the
or
If the function can only be activated or deactivated:
►
Select the desired function and activate it by pressing the "Source/Select" button.
Saving setting and terminating OSD menu
►
Press the "Menu" button on the projector.
If you do not make a selection for about 40 seconds, the OSD menu closes, and the set
i
value is stored.
Returning to the higher-level menu
►
If you want to return to the higher-level menu, select the
with the "Select" button.
Operating the OSD menu with the remote control
Activating the OSD menu
►
Press the "Menu" button on the remote control.
The basic menu is displayed.
Marking a function or submenu
►
Use
or
buttons on the remote control to move the selection to the desired function or
submenu.
A26361-K954-Z100-1-5E19, edition 5
buttons until the setting is correct.
SCENICVIEW XP70
symbol and confirm your selection
English - 15