Fujitsu SCENICVIEW XP70 User Manual page 23

SCENICVIEW XP70
System menu
Rear
If you project the image from the back against a translucent surface, this setting flips the
image horizontally.
SourceSearch
With this function, the projector automatically looks for a signal source (computer or video).
Hide OSD
If you activate this function, the menu functions are no longer displayed over the projected
image (for example, when you adjust the volume or change the signal source). This function
is useful if you have to adjust the volume during a presentation.
DPMS enable
This function activates the DPMS (Display Power Management Signaling). When the
projector receives a corresponding signal from the computer, it switches to power-saving
mode.
Language menu
20 - English
In the System menu you can adjust general operating settings.
On the Language menu you can select the language for the OSD
menu.
A26361-K954-Z100-1-5E19, edition 5